User Tools

Site Tools


storing_your_files_on_a_synology_nas_using_iscsi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
storing_your_files_on_a_synology_nas_using_iscsi [2014/09/03 16:51]
max
storing_your_files_on_a_synology_nas_using_iscsi [2014/09/03 16:52] (current)
max
Line 63: Line 63:
  
 5) Enter the IQN you created earlier in the "​**target** IQN" field, the IP address of your NAS device as "​Server IP", and the username and password if you enabled CHAP authentication earlier.\\ 5) Enter the IQN you created earlier in the "​**target** IQN" field, the IP address of your NAS device as "​Server IP", and the username and password if you enabled CHAP authentication earlier.\\
-The default "​initiator IQN" -identifying your Pi- is fine as-is.\\ ​+The default "**initiator** IQN" -identifying your Pi- is fine as-is.\\ ​
 If you need special network settings (e.g. if you want your Pi to use a static network configuration instead of DHCP) press "​network settings"​ otherwise -> press "​next"​ If you need special network settings (e.g. if you want your Pi to use a static network configuration instead of DHCP) press "​network settings"​ otherwise -> press "​next"​
  
storing_your_files_on_a_synology_nas_using_iscsi.txt ยท Last modified: 2014/09/03 16:52 by max